Marine Silicone Sealant 83ml

<div class=”pos-description”>
<div class=”element element-text last”>
<ul>
<li>Bonds to fibreglass, wood, glass, metal and some plastics; can be used above and below the waterline.</li>
<li>Provides waterproof, airtight bond, but can be easily removed; ideal for mounting deck hardware.</li>
<li>Not affected by sunlight, weathering, most chemicals or solvents.</li>
<li>Dries tack-free in less than one hour, cures completely in 24 hours; custom colours available.</li>
</ul>
</div>
</div>
<div class=”pos-bottom”>
<div class=”element element-textarea first”>
<h3>Directions</h3>
<p>The surface to be caulked must be clean, dry and oil-free. Remove cap.  Puncture inner seal. Cut nozzle to the desired opening with a knife or razor blade. Hold nozzle at a slight angle to joint or seam and apply firm, continuous pressure on the tube to maintain an even flow of sealant. Squeeze from the bottom of the tube up, pushing the caulk ahead of the nozzle, so that the nozzle tools the sealant into the cracks or openings.  Additional tooling must be done immediately as the sealant surface will skin over in 10 minutes. Material is dry to the touch in 1 hour and fully cures in 24 hours.  Remove excess sealant immediately with a clean, dry cloth. On porous surfaces, dampen the cloth with paint thinner to remove excess sealant.  After use, remove the nozzle and replace the cap.  Let caulk in nozzle cure and remove the cured plug before next use.</p>
</div>
</div>