CIP – Corrosive Inhibiting Primer (750ml)

CIP (Corrosive Inhibiting Primer) is a rust inhibiting primer which is suitable for finishing with both single and 2-pack paints and finishes. It contains the anti-corrosive properties of Marine Oil which enables it to stabilise the surface by penetrating deep into the substrate, driving out excess moisture and air to form a solid stable layer. CIP is easy to use and does not require sand or shot blasting first. It can be used on both new and rusted surfaces. It will not dissolve or break down when even high solvent paints and finishes (urethane, epoxy, chlorinated rubber, synthetic, etc.) are applied to it and the pigmentation provides enhanced protection and perfect film-forming qualities. With Owatrol’s Marine CIP, sand or shot-blasted surfaces do not require immediate priming as a light rust coating will not affect its performance or the final result. Ideal uses for Marine CIP rust inhibiting primer
Outstanding for high performance in severe conditions such as marine or tropical environments Resisting corrosive fumes Protecting ballast tanks of ships Perfect protection where a high resistant paint or two-pack finish is necessary Outstanding adherance on clean bright steel

Coverage: 15m2 per litre

Tools: Brush, Roller, Airless Sprayer

Suitable for: Exterior & Interior use

Clean up: White Spirit

Drying Time: 6 hours

Re-coating Time: 24-72 hours depending on finish – C.I.P. 24 hours; oil/alkyd paints 24-48 hours; high solvent paints i.e. 2 pack, urethane etc 48-72 hours

Suitable Surfaces: Ferrous and non-ferrous metals

CLICK HERE TO VIEW VIDEO CLICK HERE FOR TECHNICAL DATASHEET